Concept 30, cone start conversion ?

[StuartC]

I have a Concept 30 which has a cone start system situated under the tail boom. Anyone know of a conversion available to adapt this to a wand type starter? I would like to fit a Scale Fuse to it but the Position of the starter cone makes this unlikely at the moment.

[Tony Smith]

There is no conversion for the Concept 30 to 'top start with wand'

Kyosho done their own range of fuselages for the 30,pic is the Concept Jet Ranger, was started from the rear...you can just see the opening for the starter, you brought an starter extension with a special starter cone to go with it..

Attached Image:

80.02 KB

[StuartC]

Ive been doing a bit of digging since i posted this earlier and found a few pics of th Plastic bodied concept 30's that are still flying arround. Its looking like a body for one now isnt going to be as easy with the most likely suitable ones coming from Century and would require a large hole being cut in its rear end to allow starting.
Is the starter extension still available anywhere ?